Product
Ingersoll Rand 54672530 Air Filter Element | N55/N75 Screw Compressor Inlet Filter
Genuine Ingersoll Rand 54672530 air filter element for N55/N75 screw compressors. 247 mm OD, 365 mm height, 5–10 μm filtration, synthetic/glass-fiber media with low pressure drop and high dust-holding capacity. Cross-reference SA17281; serial-number matching available.
- Export packaging & documentation support
- OEM / ODM customization available
- Sample and bulk order workflow
Ingersoll Rand 54672530 Air Filter Element — Product Details
1. Product Overview
The 54672530 air filter element is a genuine Ingersoll Rand inlet filter for N55/N75 series screw air compressors. It uses high-efficiency synthetic/glass-fiber media to block dust, dirt and particulate matter from entering the screw airend, protecting rotors, bearings and oil seals from wear and extending compressor service life.
The 54672530 is a large cylindrical pleated element with an outside diameter of approximately 247 mm and a height of approximately 365 mm. It features a red polyurethane (PU) end-cap seal and is also cross-compatible with several Atlas Copco part numbers. The HiFi Filter cross-reference is SA17281.
2. Basic Specifications
| Item | Specification |
|---|---|
| Part Number | 54672530 |
| Brand | Ingersoll Rand |
| Part Name | Air Filter Element |
| Compatible Models | N55, N75 screw compressors |
| Cross-Reference | HiFi SA 17281 |
| Unit of Measure | EA (each) |
| Availability | Normally stocked |
3. Technical Specifications
3.1 Filtration Performance (Core Indicators)
| Parameter | Value |
|---|---|
| Filtration Rating | 5–10 μm |
| Filtration Efficiency | Approx. 99% @ 10 μm |
| Filter Class | F7–F8 (per EN 779 / ISO 16890) |
| Dust-Holding Capacity | Approx. 1.0–1.5 kg |
| Beta Ratio β | β₁₀ ≥ 1000 |
3.2 Flow and Pressure Drop
| Parameter | Value |
|---|---|
| Rated Air Flow | Approx. 10–13 Nm³/min (for 55–75 kW models) |
| Initial Pressure Drop | Approx. 250–350 Pa at rated flow (clean condition) |
| Operating Differential Pressure | 350–600 Pa |
| Alarm / Final Resistance | Alarm: 700 Pa; Final: 900 Pa (replace immediately) |
| Pressure Drop vs. Energy | Every 100 Pa increase in inlet pressure loss raises specific power by approx. 0.3% |
3.3 Dimensions and Mounting
| Parameter | Value |
|---|---|
| Outside Diameter | 247 mm |
| Inside Diameter | 150 mm |
| Total Height | 365 mm |
| Weight | Approx. 5 kg |
| Effective Filter Area | Approx. 3.0–4.0 m² (pleated element unfolded area) |
| Mounting Interface | Center through-hole, end-cap seal |
| Seal Type | Red polyurethane (PU) end-cap gasket, double-sided seal |
3.4 Material Construction
| Parameter | Value |
|---|---|
| Filter Media | Synthetic/glass-fiber media, yellow paper |
| Media Weight | Approx. 120–150 g/m² |
| Inner/Outer Support | Galvanized expanded metal mesh (both sides) |
| End Caps | Red polyurethane (PU) |
| Seals | Red nitrile rubber (NBR) gaskets, one top and one bottom |
| Adhesive | Polyurethane adhesive bonding end caps to media |
3.5 Operating Conditions
| Parameter | Value |
|---|---|
| Operating Temperature | Continuous: -20°C to 80°C; short-term max 100°C |
| Relative Humidity | ≤95% RH, no condensation |
| Collapse Pressure Resistance | Overall collapse differential pressure ≥ 4.0 kPa |
| Special Features | Low resistance, high dust-holding capacity, suitable for continuous industrial operation |
3.6 Service Life and Maintenance
| Parameter | Value |
|---|---|
| Service Life | Approx. 4,000 hours (8–12 months) under standard conditions; 2,000–3,000 hours in high-dust environments |
| Shelf Life | 36 months in original sealed packaging, dry environment at room temperature |
3.7 Standards
- ISO 5011: Inlet air cleaning equipment for internal combustion engines and compressors — performance testing
- ISO 16890 / EN 779: General ventilation air filter classification
- GB/T 14295: Air filters
- GB/T 6165: Test methods for air filter performance
4. Standard Maintenance and Installation Steps
Replacement Interval
- Standard conditions: every 4,000 hours or 8–12 months, whichever comes first
- High-dust conditions: every 2,000–3,000 hours
- Replace immediately if visual inspection shows blackened or heavily loaded media, or if differential pressure reaches 900 Pa
Installation Steps
- Shut down and isolate power: Turn off the main compressor power supply, apply lockout/tagout (LOTO), and confirm the unit has fully stopped.
- Open the air filter housing cover: Loosen the retaining bolts or clips and remove the cover.
- Remove the old element: Pull out the old 54672530 element and check whether the seal remains in the housing groove.
- Clean the housing: Wipe the inner walls and sealing surfaces with a clean cloth to remove dust and debris.
- Inspect the new element: Verify part number 54672530, check media for damage, end caps for cracks, and red seals for aging.
- Install the new element: Place it vertically into the center of the housing, ensuring both top and bottom seals seat correctly without misalignment.
- Reinstall the cover: Refit the cover and tighten bolts or clips evenly.
- Start-up check: Start the compressor and listen for any air leakage at the filter housing.
5. Frequently Asked Questions
Q1: Is the 54672530 a genuine OEM part?
A: The 54672530 is a genuine Ingersoll Rand part, featuring yellow high-efficiency media and a red polyurethane end-cap seal, designed for Ingersoll Rand N55/N75 series screw compressors.
Q2: Which models does the 54672530 fit?
A: It fits Ingersoll Rand N55 and N75 series screw compressors. If you are unsure about your model, please provide the serial number for verification.
Q3: What is the cross-reference number?
A: The HiFi Filter cross-reference is SA 17281. It is also compatible with the following Atlas Copco part numbers: 1613950100, 1613951000, 1631043700, 2255300129.
Q4: What are the dimensions?
A: Outside diameter approx. 247 mm, inside diameter approx. 150 mm, total height approx. 365 mm, weight approx. 5 kg.
Q5: How do I know when to replace the air filter?
A: Replace when: ① visual inspection shows blackened or heavily loaded media; ② operating differential pressure reaches the 700 Pa alarm value; ③ the 4,000-hour or 8–12-month service interval is reached.
6. Compatible Machine Models
| Series | Models |
|---|---|
| N Series | N55 |
| N Series | N75 |
To confirm compatibility for your specific machine, please provide the compressor serial number for precise verification.
7. Related Parts
| Part Number | Name | Notes |
|---|---|---|
| SA 17281 | HiFi air filter element | 54672530 cross-reference |
| 1613950100 | Atlas Copco air filter element | Compatible cross-reference |
| 1613951000 | Atlas Copco air filter element | Compatible cross-reference |
| 1631043700 | Atlas Copco air filter element | Compatible cross-reference |
| 2255300129 | Atlas Copco air filter element | Compatible cross-reference |
| 88111901 | Air filter element SSR M37 | For SSR M37/M45 models |
| 54672530 | Air filter element | This product |
Note: For 100% accurate matching, please provide the complete compressor serial number. We will check the original parts diagram and confirm the latest availability. Request a quotation or datasheet for export orders.